Server and Network Monitor

Essentials

Testimonials/Case Studies

Product Tour/Webcast

FAQ/KBase

Products > GFI Network Server Monitor > Scripting > WMI > Samples > Computer hardware related

Win32_1394Controller
Win32_BaseBoard
Win32_Battery
Win32_BIOS
Win32_Bus
Win32_CacheMemory
Win32_CDROMDrive
Win32_CurrentProbe
Win32_DesktopMonitor
Win32_DeviceMemoryAddress
Win32_DiskDrive
Win32_DisplayConfiguration
Win32_DisplayControllerConfiguration
Win32_DMAChannel
Win32_Fan
Win32_FloppyController
Win32_FloppyDrive
Win32_HeatPipe
Win32_IDEController
Win32_InfraredDevice
Win32_IRQResource
Win32_Keyboard
Win32_MemoryArray
Win32_MemoryDevice
Win32_MotherboardDevice
Win32_NetworkAdapter
Win32_NetworkAdapterConfiguration
Win32_OnBoardDevice
Win32_ParallelPort
Win32_PCMCIAController
Win32_PhysicalMemory
Win32_PhysicalMemoryArray
Win32_PnPEntity
Win32_PointingDevice
Win32_PortableBattery
Win32_PortConnector
Win32_PortResource
Win32_POTSModem
Win32_PowerManagementEvent
Win32_Printer
Win32_PrinterConfiguration
Win32_PrintJob
Win32_Processor
Win32_Refrigeration
Win32_SerialPort
Win32_SerialPortConfiguration
Win32_SMBIOSMemory
Win32_SoundDevice
Win32_SystemEnclosure
Win32_SystemMemoryResource
Win32_SystemSlot
Win32_TapeDrive
Win32_TemperatureProbe
Win32_UninterruptiblePowerSupply
Win32_USBController
Win32_VideoConfiguration
Win32_VideoController
Win32_VoltageProbe

Win32_1394Controller
The Win32_1394Controller WMI class represents the capabilities and management of a 1394 controller. IEEE 1394 is a specification for a high speed serial bus.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_1394Controller",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "MaxNumberControlled: " & objItem.MaxNumberControlled
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "ProtocolSupported: " & objItem.ProtocolSupported
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "TimeOfLastReset: " & objItem.TimeOfLastReset
Next

Win32_BaseBoard
The Win32_BaseBoard WMI class represents a baseboard (also known as a motherboard or system board).

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_BaseBoard",,48)
For Each objItem in colItems
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigOptions: " & objItem.ConfigOptions
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Depth: " & objItem.Depth
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "Height: " & objItem.Height
    Wscript.Echo "HostingBoard: " & objItem.HostingBoard
    Wscript.Echo "HotSwappable: " & objItem.HotSwappable
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "Model: " & objItem.Model
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "OtherIdentifyingInfo: " & objItem.OtherIdentifyingInfo
    Wscript.Echo "PartNumber: " & objItem.PartNumber
    Wscript.Echo "PoweredOn: " & objItem.PoweredOn
    Wscript.Echo "Product: " & objItem.Product
    Wscript.Echo "Removable: " & objItem.Removable
    Wscript.Echo "Replaceable: " & objItem.Replaceable
    Wscript.Echo "RequirementsDescription: " & objItem.RequirementsDescription
    Wscript.Echo "RequiresDaughterBoard: " & objItem.RequiresDaughterBoard
    Wscript.Echo "SerialNumber: " & objItem.SerialNumber
    Wscript.Echo "SKU: " & objItem.SKU
    Wscript.Echo "SlotLayout: " & objItem.SlotLayout
    Wscript.Echo "SpecialRequirements: " & objItem.SpecialRequirements
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "Tag: " & objItem.Tag
    Wscript.Echo "Version: " & objItem.Version
    Wscript.Echo "Weight: " & objItem.Weight
    Wscript.Echo "Width: " & objItem.Width
Next

Win32_Battery
The Win32_Battery WMI class represents a battery connected to the computer system. Windows 2000 and Windows 98 do not report instances of Win32_Battery unless Advanced Power Management (APM) is enabled on the system, and a battery is present.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_Battery",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "BatteryRechargeTime: " & objItem.BatteryRechargeTime
    Wscript.Echo "BatteryStatus: " & objItem.BatteryStatus
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "Chemistry: " & objItem.Chemistry
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DesignCapacity: " & objItem.DesignCapacity
    Wscript.Echo "DesignVoltage: " & objItem.DesignVoltage
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "EstimatedChargeRemaining: " & objItem.EstimatedChargeRemaining
    Wscript.Echo "EstimatedRunTime: " & objItem.EstimatedRunTime
    Wscript.Echo "ExpectedBatteryLife: " & objItem.ExpectedBatteryLife
    Wscript.Echo "ExpectedLife: " & objItem.ExpectedLife
    Wscript.Echo "FullChargeCapacity: " & objItem.FullChargeCapacity
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "MaxRechargeTime: " & objItem.MaxRechargeTime
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "SmartBatteryVersion: " & objItem.SmartBatteryVersion
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "TimeOnBattery: " & objItem.TimeOnBattery
    Wscript.Echo "TimeToFullCharge: " & objItem.TimeToFullCharge
Next

Win32_BIOS
The Win32_BIOS WMI class represents the attributes of the computer system's basic input/output services (BIOS) that are installed on the computer.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_BIOS",,48)
For Each objItem in colItems
    Wscript.Echo "BiosCharacteristics: " & objItem.BiosCharacteristics
    Wscript.Echo "BuildNumber: " & objItem.BuildNumber
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "CodeSet: " & objItem.CodeSet
    Wscript.Echo "CurrentLanguage: " & objItem.CurrentLanguage
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "IdentificationCode: " & objItem.IdentificationCode
    Wscript.Echo "InstallableLanguages: " & objItem.InstallableLanguages
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LanguageEdition: " & objItem.LanguageEdition
    Wscript.Echo "ListOfLanguages: " & objItem.ListOfLanguages
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "OtherTargetOS: " & objItem.OtherTargetOS
    Wscript.Echo "PrimaryBIOS: " & objItem.PrimaryBIOS
    Wscript.Echo "ReleaseDate: " & objItem.ReleaseDate
    Wscript.Echo "SerialNumber: " & objItem.SerialNumber
    Wscript.Echo "SMBIOSBIOSVersion: " & objItem.SMBIOSBIOSVersion
    Wscript.Echo "SMBIOSMajorVersion: " & objItem.SMBIOSMajorVersion
    Wscript.Echo "SMBIOSMinorVersion: " & objItem.SMBIOSMinorVersion
    Wscript.Echo "SMBIOSPresent: " & objItem.SMBIOSPresent
    Wscript.Echo "SoftwareElementID: " & objItem.SoftwareElementID
    Wscript.Echo "SoftwareElementState: " & objItem.SoftwareElementState
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "TargetOperatingSystem: " & objItem.TargetOperatingSystem
    Wscript.Echo "Version: " & objItem.Version
Next

Win32_Bus
The Win32_Bus WMI class represents a physical bus as seen by a Windows operating system. Any instance of a Windows bus is a descendent (or member) of this class.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_Bus",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "BusNum: " & objItem.BusNum
    Wscript.Echo "BusType: " & objItem.BusType
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
Next

Win32_CacheMemory
The Win32_CacheMemory WMI class represents cache memory (internal and external) on a computer system.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_CacheMemory",,48)
For Each objItem in colItems
    Wscript.Echo "Access: " & objItem.Access
    Wscript.Echo "AdditionalErrorData: " & objItem.AdditionalErrorData
    Wscript.Echo "Associativity: " & objItem.Associativity
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "BlockSize: " & objItem.BlockSize
    Wscript.Echo "CacheSpeed: " & objItem.CacheSpeed
    Wscript.Echo "CacheType: " & objItem.CacheType
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CorrectableError: " & objItem.CorrectableError
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "CurrentSRAM: " & objItem.CurrentSRAM
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "EndingAddress: " & objItem.EndingAddress
    Wscript.Echo "ErrorAccess: " & objItem.ErrorAccess
    Wscript.Echo "ErrorAddress: " & objItem.ErrorAddress
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorCorrectType: " & objItem.ErrorCorrectType
    Wscript.Echo "ErrorData: " & objItem.ErrorData
    Wscript.Echo "ErrorDataOrder: " & objItem.ErrorDataOrder
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "ErrorInfo: " & objItem.ErrorInfo
    Wscript.Echo "ErrorMethodology: " & objItem.ErrorMethodology
    Wscript.Echo "ErrorResolution: " & objItem.ErrorResolution
    Wscript.Echo "ErrorTime: " & objItem.ErrorTime
    Wscript.Echo "ErrorTransferSize: " & objItem.ErrorTransferSize
    Wscript.Echo "FlushTimer: " & objItem.FlushTimer
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "InstalledSize: " & objItem.InstalledSize
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Level: " & objItem.Level
    Wscript.Echo "LineSize: " & objItem.LineSize
    Wscript.Echo "Location: " & objItem.Location
    Wscript.Echo "MaxCacheSize: " & objItem.MaxCacheSize
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "NumberOfBlocks: " & objItem.NumberOfBlocks
    Wscript.Echo "OtherErrorDescription: " & objItem.OtherErrorDescription
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "Purpose: " & objItem.Purpose
    Wscript.Echo "ReadPolicy: " & objItem.ReadPolicy
    Wscript.Echo "ReplacementPolicy: " & objItem.ReplacementPolicy
    Wscript.Echo "StartingAddress: " & objItem.StartingAddress
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SupportedSRAM: " & objItem.SupportedSRAM
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemLevelAddress: " & objItem.SystemLevelAddress
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "WritePolicy: " & objItem.WritePolicy
Next

Win32_CDROMDrive
The Win32_CDROMDrive WMI class represents a CD-ROM drive on a Windows computer system. Note that the name of the drive does not correspond to the logical drive letter assigned to device.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_CDROMDrive",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Capabilities: " & objItem.Capabilities
    Wscript.Echo "CapabilityDescriptions: " & objItem.CapabilityDescriptions
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "CompressionMethod: " & objItem.CompressionMethod
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "DefaultBlockSize: " & objItem.DefaultBlockSize
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "Drive: " & objItem.Drive
    Wscript.Echo "DriveIntegrity: " & objItem.DriveIntegrity
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "ErrorMethodology: " & objItem.ErrorMethodology
    Wscript.Echo "FileSystemFlags: " & objItem.FileSystemFlags
    Wscript.Echo "FileSystemFlagsEx: " & objItem.FileSystemFlagsEx
    Wscript.Echo "Id: " & objItem.Id
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "MaxBlockSize: " & objItem.MaxBlockSize
    Wscript.Echo "MaximumComponentLength: " & objItem.MaximumComponentLength
    Wscript.Echo "MaxMediaSize: " & objItem.MaxMediaSize
    Wscript.Echo "MediaLoaded: " & objItem.MediaLoaded
    Wscript.Echo "MediaType: " & objItem.MediaType
    Wscript.Echo "MinBlockSize: " & objItem.MinBlockSize
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "NeedsCleaning: " & objItem.NeedsCleaning
    Wscript.Echo "NumberOfMediaSupported: " & objItem.NumberOfMediaSupported
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "RevisionLevel: " & objItem.RevisionLevel
    Wscript.Echo "SCSIBus: " & objItem.SCSIBus
    Wscript.Echo "SCSILogicalUnit: " & objItem.SCSILogicalUnit
    Wscript.Echo "SCSIPort: " & objItem.SCSIPort
    Wscript.Echo "SCSITargetId: " & objItem.SCSITargetId
    Wscript.Echo "Size: " & objItem.Size
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "TransferRate: " & objItem.TransferRate
    Wscript.Echo "VolumeName: " & objItem.VolumeName
    Wscript.Echo "VolumeSerialNumber: " & objItem.VolumeSerialNumber
Next

Win32_CurrentProbe
The Win32_CurrentProbe WMI class represents the properties of a current monitoring sensor (ammeter).

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_CurrentProbe",,48)
For Each objItem in colItems
    Wscript.Echo "Accuracy: " & objItem.Accuracy
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "CurrentReading: " & objItem.CurrentReading
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "IsLinear: " & objItem.IsLinear
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "LowerThresholdCritical: " & objItem.LowerThresholdCritical
    Wscript.Echo "LowerThresholdFatal: " & objItem.LowerThresholdFatal
    Wscript.Echo "LowerThresholdNonCritical: " & objItem.LowerThresholdNonCritical
    Wscript.Echo "MaxReadable: " & objItem.MaxReadable
    Wscript.Echo "MinReadable: " & objItem.MinReadable
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "NominalReading: " & objItem.NominalReading
    Wscript.Echo "NormalMax: " & objItem.NormalMax
    Wscript.Echo "NormalMin: " & objItem.NormalMin
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "Resolution: " & objItem.Resolution
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "Tolerance: " & objItem.Tolerance
    Wscript.Echo "UpperThresholdCritical: " & objItem.UpperThresholdCritical
    Wscript.Echo "UpperThresholdFatal: " & objItem.UpperThresholdFatal
    Wscript.Echo "UpperThresholdNonCritical: " & objItem.UpperThresholdNonCritical
Next

Win32_DesktopMonitor
The Win32_DesktopMonitor WMI class represents the type of monitor or display device attached to the computer system.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_DesktopMonitor",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Bandwidth: " & objItem.Bandwidth
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "DisplayType: " & objItem.DisplayType
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "IsLocked: " & objItem.IsLocked
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "MonitorManufacturer: " & objItem.MonitorManufacturer
    Wscript.Echo "MonitorType: " & objItem.MonitorType
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PixelsPerXLogicalInch: " & objItem.PixelsPerXLogicalInch
    Wscript.Echo "PixelsPerYLogicalInch: " & objItem.PixelsPerYLogicalInch
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "ScreenHeight: " & objItem.ScreenHeight
    Wscript.Echo "ScreenWidth: " & objItem.ScreenWidth
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
Next

Win32_DeviceMemoryAddress
The Win32_DeviceMemoryAddress WMI class represents a device memory address on a Windows system.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_DeviceMemoryAddress",,48)
For Each objItem in colItems
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "CSCreationClassName: " & objItem.CSCreationClassName
    Wscript.Echo "CSName: " & objItem.CSName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "EndingAddress: " & objItem.EndingAddress
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "MemoryType: " & objItem.MemoryType
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "StartingAddress: " & objItem.StartingAddress
    Wscript.Echo "Status: " & objItem.Status
Next

Win32_DiskDrive
The Win32_DiskDrive WMI class represents a physical disk drive as seen by a computer running the Windows operating system. Any interface to a Windows physical disk drive is a descendent (or member) of this class. The features of the disk drive seen through this object correspond to the logical and management characteristics of the drive. In some cases, this may not reflect the actual physical characteristics of the device. Any object based on another logical device would not be a member of this class.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_DiskDrive",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "BytesPerSector: " & objItem.BytesPerSector
    Wscript.Echo "Capabilities: " & objItem.Capabilities
    Wscript.Echo "CapabilityDescriptions: " & objItem.CapabilityDescriptions
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "CompressionMethod: " & objItem.CompressionMethod
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "DefaultBlockSize: " & objItem.DefaultBlockSize
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "ErrorMethodology: " & objItem.ErrorMethodology
    Wscript.Echo "Index: " & objItem.Index
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "InterfaceType: " & objItem.InterfaceType
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "MaxBlockSize: " & objItem.MaxBlockSize
    Wscript.Echo "MaxMediaSize: " & objItem.MaxMediaSize
    Wscript.Echo "MediaLoaded: " & objItem.MediaLoaded
    Wscript.Echo "MediaType: " & objItem.MediaType
    Wscript.Echo "MinBlockSize: " & objItem.MinBlockSize
    Wscript.Echo "Model: " & objItem.Model
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "NeedsCleaning: " & objItem.NeedsCleaning
    Wscript.Echo "NumberOfMediaSupported: " & objItem.NumberOfMediaSupported
    Wscript.Echo "Partitions: " & objItem.Partitions
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "SCSIBus: " & objItem.SCSIBus
    Wscript.Echo "SCSILogicalUnit: " & objItem.SCSILogicalUnit
    Wscript.Echo "SCSIPort: " & objItem.SCSIPort
    Wscript.Echo "SCSITargetId: " & objItem.SCSITargetId
    Wscript.Echo "SectorsPerTrack: " & objItem.SectorsPerTrack
    Wscript.Echo "Size: " & objItem.Size
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "TotalCylinders: " & objItem.TotalCylinders
    Wscript.Echo "TotalHeads: " & objItem.TotalHeads
    Wscript.Echo "TotalSectors: " & objItem.TotalSectors
    Wscript.Echo "TotalTracks: " & objItem.TotalTracks
    Wscript.Echo "TracksPerCylinder: " & objItem.TracksPerCylinder
Next

Win32_DisplayConfiguration
The Win32_DisplayConfiguration WMI class represents configuration information for the display device on a Windows system.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_DisplayConfiguration",,48)
For Each objItem in colItems
    Wscript.Echo "BitsPerPel: " & objItem.BitsPerPel
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceName: " & objItem.DeviceName
    Wscript.Echo "DisplayFlags: " & objItem.DisplayFlags
    Wscript.Echo "DisplayFrequency: " & objItem.DisplayFrequency
    Wscript.Echo "DitherType: " & objItem.DitherType
    Wscript.Echo "DriverVersion: " & objItem.DriverVersion
    Wscript.Echo "ICMIntent: " & objItem.ICMIntent
    Wscript.Echo "ICMMethod: " & objItem.ICMMethod
    Wscript.Echo "LogPixels: " & objItem.LogPixels
    Wscript.Echo "PelsHeight: " & objItem.PelsHeight
    Wscript.Echo "PelsWidth: " & objItem.PelsWidth
    Wscript.Echo "SettingID: " & objItem.SettingID
    Wscript.Echo "SpecificationVersion: " & objItem.SpecificationVersion
Next

Win32_DisplayControllerConfiguration
The Win32_DisplayControllerConfiguration WMI class represents the video adapter configuration information of a Windows system.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_DisplayControllerConfiguration",,48)
For Each objItem in colItems
    Wscript.Echo "BitsPerPixel: " & objItem.BitsPerPixel
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ColorPlanes: " & objItem.ColorPlanes
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceEntriesInAColorTable: " & objItem.DeviceEntriesInAColorTable
    Wscript.Echo "DeviceSpecificPens: " & objItem.DeviceSpecificPens
    Wscript.Echo "HorizontalResolution: " & objItem.HorizontalResolution
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "RefreshRate: " & objItem.RefreshRate
    Wscript.Echo "ReservedSystemPaletteEntries: " & objItem.ReservedSystemPaletteEntries
    Wscript.Echo "SettingID: " & objItem.SettingID
    Wscript.Echo "SystemPaletteEntries: " & objItem.SystemPaletteEntries
    Wscript.Echo "VerticalResolution: " & objItem.VerticalResolution
    Wscript.Echo "VideoMode: " & objItem.VideoMode
Next

Win32_DMAChannel
The Win32_DMAChannel WMI class represents a direct memory access (DMA) channel on a Windows computer system. DMA is a method of moving data from a device to memory (or vice versa) without the help of the microprocessor. The system board uses a DMA controller to handle a fixed number of channels, each of which can be used by one (and only one) device at a time.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_DMAChannel",,48)
For Each objItem in colItems
    Wscript.Echo "AddressSize: " & objItem.AddressSize
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "BurstMode: " & objItem.BurstMode
    Wscript.Echo "ByteMode: " & objItem.ByteMode
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ChannelTiming: " & objItem.ChannelTiming
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "CSCreationClassName: " & objItem.CSCreationClassName
    Wscript.Echo "CSName: " & objItem.CSName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DMAChannel: " & objItem.DMAChannel
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "MaxTransferSize: " & objItem.MaxTransferSize
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "Port: " & objItem.Port
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "TransferWidths: " & objItem.TransferWidths
    Wscript.Echo "TypeCTiming: " & objItem.TypeCTiming
    Wscript.Echo "WordMode: " & objItem.WordMode
Next

Win32_Fan
The Win32_Fan WMI class represents the properties of a fan device in the computer system. For example, the CPU cooling fan.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_Fan",,48)
For Each objItem in colItems
    Wscript.Echo "ActiveCooling: " & objItem.ActiveCooling
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DesiredSpeed: " & objItem.DesiredSpeed
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "VariableSpeed: " & objItem.VariableSpeed
Next

Win32_FloppyController
The Win32_FloppyController WMI class represents the capabilities and management capacity of a floppy disk drive controller.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_FloppyController",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "MaxNumberControlled: " & objItem.MaxNumberControlled
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "ProtocolSupported: " & objItem.ProtocolSupported
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "TimeOfLastReset: " & objItem.TimeOfLastReset
Next

Win32_FloppyDrive
The Win32_FloppyDrive WMI class manages the capabilities of a floppy disk drive.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_FloppyDrive",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Capabilities: " & objItem.Capabilities
    Wscript.Echo "CapabilityDescriptions: " & objItem.CapabilityDescriptions
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "CompressionMethod: " & objItem.CompressionMethod
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "DefaultBlockSize: " & objItem.DefaultBlockSize
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "ErrorMethodology: " & objItem.ErrorMethodology
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "MaxBlockSize: " & objItem.MaxBlockSize
    Wscript.Echo "MaxMediaSize: " & objItem.MaxMediaSize
    Wscript.Echo "MinBlockSize: " & objItem.MinBlockSize
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "NeedsCleaning: " & objItem.NeedsCleaning
    Wscript.Echo "NumberOfMediaSupported: " & objItem.NumberOfMediaSupported
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
Next

Win32_HeatPipe
The Win32_HeatPipe WMI class represents the properties of a heat pipe cooling device.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_HeatPipe",,48)
For Each objItem in colItems
    Wscript.Echo "ActiveCooling: " & objItem.ActiveCooling
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
Next

Win32_IDEController
The Win32_IDEController WMI class manages the capabilities of an IDE controller device.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_IDEController",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "MaxNumberControlled: " & objItem.MaxNumberControlled
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "ProtocolSupported: " & objItem.ProtocolSupported
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "TimeOfLastReset: " & objItem.TimeOfLastReset
Next

Win32_InfraredDevice
The Win32_InfraredDevice WMI class represents the capabilities and management of an infrared device.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_InfraredDevice",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "MaxNumberControlled: " & objItem.MaxNumberControlled
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "ProtocolSupported: " & objItem.ProtocolSupported
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "TimeOfLastReset: " & objItem.TimeOfLastReset
Next

Win32_IRQResource
The Win32_IRQResource WMI class represents an interrupt request line (IRQ) number on a Windows computer system. An interrupt request is a signal sent to the CPU by a device or program for time critical events. IRQ can be hardware or software-based.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_IRQResource",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "CSCreationClassName: " & objItem.CSCreationClassName
    Wscript.Echo "CSName: " & objItem.CSName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "Hardware: " & objItem.Hardware
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "IRQNumber: " & objItem.IRQNumber
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "Shareable: " & objItem.Shareable
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "TriggerLevel: " & objItem.TriggerLevel
    Wscript.Echo "TriggerType: " & objItem.TriggerType
    Wscript.Echo "Vector: " & objItem.Vector
Next

Win32_Keyboard
The Win32_Keyboard WMI class represents a keyboard installed on a Windows system.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_Keyboard",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "IsLocked: " & objItem.IsLocked
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Layout: " & objItem.Layout
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "NumberOfFunctionKeys: " & objItem.NumberOfFunctionKeys
    Wscript.Echo "Password: " & objItem.Password
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
Next

Win32_MemoryArray
The Win32_MemoryArray WMI class represents the properties of the computer system memory array and mapped addresses.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_MemoryArray",,48)
For Each objItem in colItems
    Wscript.Echo "Access: " & objItem.Access
    Wscript.Echo "AdditionalErrorData: " & objItem.AdditionalErrorData
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "BlockSize: " & objItem.BlockSize
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CorrectableError: " & objItem.CorrectableError
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "EndingAddress: " & objItem.EndingAddress
    Wscript.Echo "ErrorAccess: " & objItem.ErrorAccess
    Wscript.Echo "ErrorAddress: " & objItem.ErrorAddress
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorData: " & objItem.ErrorData
    Wscript.Echo "ErrorDataOrder: " & objItem.ErrorDataOrder
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "ErrorGranularity: " & objItem.ErrorGranularity
    Wscript.Echo "ErrorInfo: " & objItem.ErrorInfo
    Wscript.Echo "ErrorMethodology: " & objItem.ErrorMethodology
    Wscript.Echo "ErrorResolution: " & objItem.ErrorResolution
    Wscript.Echo "ErrorTime: " & objItem.ErrorTime
    Wscript.Echo "ErrorTransferSize: " & objItem.ErrorTransferSize
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "NumberOfBlocks: " & objItem.NumberOfBlocks
    Wscript.Echo "OtherErrorDescription: " & objItem.OtherErrorDescription
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "Purpose: " & objItem.Purpose
    Wscript.Echo "StartingAddress: " & objItem.StartingAddress
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemLevelAddress: " & objItem.SystemLevelAddress
    Wscript.Echo "SystemName: " & objItem.SystemName
Next

Win32_MemoryDevice
The Win32_MemoryDevice WMI class represents the properties of a computer system's memory device along with its associated mapped addresses.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_MemoryDevice",,48)
For Each objItem in colItems
    Wscript.Echo "Access: " & objItem.Access
    Wscript.Echo "AdditionalErrorData: " & objItem.AdditionalErrorData
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "BlockSize: " & objItem.BlockSize
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CorrectableError: " & objItem.CorrectableError
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "EndingAddress: " & objItem.EndingAddress
    Wscript.Echo "ErrorAccess: " & objItem.ErrorAccess
    Wscript.Echo "ErrorAddress: " & objItem.ErrorAddress
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorData: " & objItem.ErrorData
    Wscript.Echo "ErrorDataOrder: " & objItem.ErrorDataOrder
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "ErrorGranularity: " & objItem.ErrorGranularity
    Wscript.Echo "ErrorInfo: " & objItem.ErrorInfo
    Wscript.Echo "ErrorMethodology: " & objItem.ErrorMethodology
    Wscript.Echo "ErrorResolution: " & objItem.ErrorResolution
    Wscript.Echo "ErrorTime: " & objItem.ErrorTime
    Wscript.Echo "ErrorTransferSize: " & objItem.ErrorTransferSize
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "NumberOfBlocks: " & objItem.NumberOfBlocks
    Wscript.Echo "OtherErrorDescription: " & objItem.OtherErrorDescription
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "Purpose: " & objItem.Purpose
    Wscript.Echo "StartingAddress: " & objItem.StartingAddress
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemLevelAddress: " & objItem.SystemLevelAddress
    Wscript.Echo "SystemName: " & objItem.SystemName
Next

Win32_MotherboardDevice
The Win32_MotherboardDevice WMI class represents a device that contains the central components of the Windows computer system.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_MotherboardDevice",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "PrimaryBusType: " & objItem.PrimaryBusType
    Wscript.Echo "RevisionNumber: " & objItem.RevisionNumber
    Wscript.Echo "SecondaryBusType: " & objItem.SecondaryBusType
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
Next

Win32_NetworkAdapter
The Win32_NetworkAdapterWMI class represents a network adapter on a Windows system.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_NetworkAdapter",,48)
For Each objItem in colItems
    Wscript.Echo "AdapterType: " & objItem.AdapterType
    Wscript.Echo "AutoSense: " & objItem.AutoSense
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "Index: " & objItem.Index
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "Installed: " & objItem.Installed
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "MACAddress: " & objItem.MACAddress
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "MaxNumberControlled: " & objItem.MaxNumberControlled
    Wscript.Echo "MaxSpeed: " & objItem.MaxSpeed
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "NetworkAddresses: " & objItem.NetworkAddresses
    Wscript.Echo "PermanentAddress: " & objItem.PermanentAddress
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "ProductName: " & objItem.ProductName
    Wscript.Echo "ServiceName: " & objItem.ServiceName
    Wscript.Echo "Speed: " & objItem.Speed
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "TimeOfLastReset: " & objItem.TimeOfLastReset
Next

Win32_NetworkAdapterConfiguration
The Win32_NetworkAdapterConfiguration WMI class represents the attributes and behaviors of a network adapter. This class has been extended to include extra properties and methods that support the management of the TCP/IP and Internetworking Packet Exchange (IPX) protocols (and are independent of the network adapter).

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_NetworkAdapterConfiguration",,48)
For Each objItem in colItems
    Wscript.Echo "ArpAlwaysSourceRoute: " & objItem.ArpAlwaysSourceRoute
    Wscript.Echo "ArpUseEtherSNAP: " & objItem.ArpUseEtherSNAP
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "DatabasePath: " & objItem.DatabasePath
    Wscript.Echo "DeadGWDetectEnabled: " & objItem.DeadGWDetectEnabled
    Wscript.Echo "DefaultIPGateway: " & objItem.DefaultIPGateway
    Wscript.Echo "DefaultTOS: " & objItem.DefaultTOS
    Wscript.Echo "DefaultTTL: " & objItem.DefaultTTL
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DHCPEnabled: " & objItem.DHCPEnabled
    Wscript.Echo "DHCPLeaseExpires: " & objItem.DHCPLeaseExpires
    Wscript.Echo "DHCPLeaseObtained: " & objItem.DHCPLeaseObtained
    Wscript.Echo "DHCPServer: " & objItem.DHCPServer
    Wscript.Echo "DNSDomain: " & objItem.DNSDomain
    Wscript.Echo "DNSDomainSuffixSearchOrder: " & objItem.DNSDomainSuffixSearchOrder
    Wscript.Echo "DNSEnabledForWINSResolution: " & objItem.DNSEnabledForWINSResolution
    Wscript.Echo "DNSHostName: " & objItem.DNSHostName
    Wscript.Echo "DNSServerSearchOrder: " & objItem.DNSServerSearchOrder
    Wscript.Echo "DomainDNSRegistrationEnabled: " & objItem.DomainDNSRegistrationEnabled
    Wscript.Echo "ForwardBufferMemory: " & objItem.ForwardBufferMemory
    Wscript.Echo "FullDNSRegistrationEnabled: " & objItem.FullDNSRegistrationEnabled
    Wscript.Echo "GatewayCostMetric: " & objItem.GatewayCostMetric
    Wscript.Echo "IGMPLevel: " & objItem.IGMPLevel
    Wscript.Echo "Index: " & objItem.Index
    Wscript.Echo "IPAddress: " & objItem.IPAddress
    Wscript.Echo "IPConnectionMetric: " & objItem.IPConnectionMetric
    Wscript.Echo "IPEnabled: " & objItem.IPEnabled
    Wscript.Echo "IPFilterSecurityEnabled: " & objItem.IPFilterSecurityEnabled
    Wscript.Echo "IPPortSecurityEnabled: " & objItem.IPPortSecurityEnabled
    Wscript.Echo "IPSecPermitIPProtocols: " & objItem.IPSecPermitIPProtocols
    Wscript.Echo "IPSecPermitTCPPorts: " & objItem.IPSecPermitTCPPorts
    Wscript.Echo "IPSecPermitUDPPorts: " & objItem.IPSecPermitUDPPorts
    Wscript.Echo "IPSubnet: " & objItem.IPSubnet
    Wscript.Echo "IPUseZeroBroadcast: " & objItem.IPUseZeroBroadcast
    Wscript.Echo "IPXAddress: " & objItem.IPXAddress
    Wscript.Echo "IPXEnabled: " & objItem.IPXEnabled
    Wscript.Echo "IPXFrameType: " & objItem.IPXFrameType
    Wscript.Echo "IPXMediaType: " & objItem.IPXMediaType
    Wscript.Echo "IPXNetworkNumber: " & objItem.IPXNetworkNumber
    Wscript.Echo "IPXVirtualNetNumber: " & objItem.IPXVirtualNetNumber
    Wscript.Echo "KeepAliveInterval: " & objItem.KeepAliveInterval
    Wscript.Echo "KeepAliveTime: " & objItem.KeepAliveTime
    Wscript.Echo "MACAddress: " & objItem.MACAddress
    Wscript.Echo "MTU: " & objItem.MTU
    Wscript.Echo "NumForwardPackets: " & objItem.NumForwardPackets
    Wscript.Echo "PMTUBHDetectEnabled: " & objItem.PMTUBHDetectEnabled
    Wscript.Echo "PMTUDiscoveryEnabled: " & objItem.PMTUDiscoveryEnabled
    Wscript.Echo "ServiceName: " & objItem.ServiceName
    Wscript.Echo "SettingID: " & objItem.SettingID
    Wscript.Echo "TcpipNetbiosOptions: " & objItem.TcpipNetbiosOptions
    Wscript.Echo "TcpMaxConnectRetransmissions: " & objItem.TcpMaxConnectRetransmissions
    Wscript.Echo "TcpMaxDataRetransmissions: " & objItem.TcpMaxDataRetransmissions
    Wscript.Echo "TcpNumConnections: " & objItem.TcpNumConnections
    Wscript.Echo "TcpUseRFC1122UrgentPointer: " & objItem.TcpUseRFC1122UrgentPointer
    Wscript.Echo "TcpWindowSize: " & objItem.TcpWindowSize
    Wscript.Echo "WINSEnableLMHostsLookup: " & objItem.WINSEnableLMHostsLookup
    Wscript.Echo "WINSHostLookupFile: " & objItem.WINSHostLookupFile
    Wscript.Echo "WINSPrimaryServer: " & objItem.WINSPrimaryServer
    Wscript.Echo "WINSScopeID: " & objItem.WINSScopeID
    Wscript.Echo "WINSSecondaryServer: " & objItem.WINSSecondaryServer
Next

Win32_OnBoardDevice
The Win32_OnBoardDevice WMI class represents common adapter devices built into the motherboard (system board).

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_OnBoardDevice",,48)
For Each objItem in colItems
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceType: " & objItem.DeviceType
    Wscript.Echo "Enabled: " & objItem.Enabled
    Wscript.Echo "HotSwappable: " & objItem.HotSwappable
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "Model: " & objItem.Model
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "OtherIdentifyingInfo: " & objItem.OtherIdentifyingInfo
    Wscript.Echo "PartNumber: " & objItem.PartNumber
    Wscript.Echo "PoweredOn: " & objItem.PoweredOn
    Wscript.Echo "Removable: " & objItem.Removable
    Wscript.Echo "Replaceable: " & objItem.Replaceable
    Wscript.Echo "SerialNumber: " & objItem.SerialNumber
    Wscript.Echo "SKU: " & objItem.SKU
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "Tag: " & objItem.Tag
    Wscript.Echo "Version: " & objItem.Version
Next

Win32_ParallelPort
The Win32_ParallelPort WMI class represents the properties of a parallel port on a Windows computer system.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_ParallelPort",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Capabilities: " & objItem.Capabilities
    Wscript.Echo "CapabilityDescriptions: " & objItem.CapabilityDescriptions
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "DMASupport: " & objItem.DMASupport
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "MaxNumberControlled: " & objItem.MaxNumberControlled
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "OSAutoDiscovered: " & objItem.OSAutoDiscovered
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "ProtocolSupported: " & objItem.ProtocolSupported
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "TimeOfLastReset: " & objItem.TimeOfLastReset
Next

Win32_PCMCIAController
The Win32_PCMCIAController WMI class manages the capabilities of a Personal Computer Memory Card Interface Adapter (PCMCIA of PC card) controller device.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_PCMCIAController",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "MaxNumberControlled: " & objItem.MaxNumberControlled
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "ProtocolSupported: " & objItem.ProtocolSupported
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "TimeOfLastReset: " & objItem.TimeOfLastReset
Next

Win32_PhysicalMemory
The Win32_PhysicalMemory WMI class represents a physical memory device located on a computer system as available to the operating system.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_PhysicalMemory",,48)
For Each objItem in colItems
    Wscript.Echo "BankLabel: " & objItem.BankLabel
    Wscript.Echo "Capacity: " & objItem.Capacity
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "DataWidth: " & objItem.DataWidth
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceLocator: " & objItem.DeviceLocator
    Wscript.Echo "FormFactor: " & objItem.FormFactor
    Wscript.Echo "HotSwappable: " & objItem.HotSwappable
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "InterleaveDataDepth: " & objItem.InterleaveDataDepth
    Wscript.Echo "InterleavePosition: " & objItem.InterleavePosition
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "MemoryType: " & objItem.MemoryType
    Wscript.Echo "Model: " & objItem.Model
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "OtherIdentifyingInfo: " & objItem.OtherIdentifyingInfo
    Wscript.Echo "PartNumber: " & objItem.PartNumber
    Wscript.Echo "PositionInRow: " & objItem.PositionInRow
    Wscript.Echo "PoweredOn: " & objItem.PoweredOn
    Wscript.Echo "Removable: " & objItem.Removable
    Wscript.Echo "Replaceable: " & objItem.Replaceable
    Wscript.Echo "SerialNumber: " & objItem.SerialNumber
    Wscript.Echo "SKU: " & objItem.SKU
    Wscript.Echo "Speed: " & objItem.Speed
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "Tag: " & objItem.Tag
    Wscript.Echo "TotalWidth: " & objItem.TotalWidth
    Wscript.Echo "TypeDetail: " & objItem.TypeDetail
    Wscript.Echo "Version: " & objItem.Version
Next

Win32_PhysicalMemoryArray
The Win32_PhysicalMemoryArray WMI class represents details about the computer system's physical memory. This includes the number of memory devices, memory capacity available, and memory type (for example, system memory or video memory).

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_PhysicalMemoryArray",,48)
For Each objItem in colItems
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Depth: " & objItem.Depth
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "Height: " & objItem.Height
    Wscript.Echo "HotSwappable: " & objItem.HotSwappable
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "Location: " & objItem.Location
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "MaxCapacity: " & objItem.MaxCapacity
    Wscript.Echo "MemoryDevices: " & objItem.MemoryDevices
    Wscript.Echo "MemoryErrorCorrection: " & objItem.MemoryErrorCorrection
    Wscript.Echo "Model: " & objItem.Model
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "OtherIdentifyingInfo: " & objItem.OtherIdentifyingInfo
    Wscript.Echo "PartNumber: " & objItem.PartNumber
    Wscript.Echo "PoweredOn: " & objItem.PoweredOn
    Wscript.Echo "Removable: " & objItem.Removable
    Wscript.Echo "Replaceable: " & objItem.Replaceable
    Wscript.Echo "SerialNumber: " & objItem.SerialNumber
    Wscript.Echo "SKU: " & objItem.SKU
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "Tag: " & objItem.Tag
    Wscript.Echo "Use: " & objItem.Use
    Wscript.Echo "Version: " & objItem.Version
    Wscript.Echo "Weight: " & objItem.Weight
    Wscript.Echo "Width: " & objItem.Width
Next

Win32_PnPEntity
The Win32_PnPEntity WMI class represents the properties of a Plug and Play device. Plug and Play entities are shown as entries in the Device Manager located in Control Panel.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_PnPEntity",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ClassGuid: " & objItem.ClassGuid
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "Service: " & objItem.Service
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
Next

Win32_PointingDevice
The Win32_PointingDevice WMI class represents an input device used to point to and select regions on the display of a Windows computer system. Any device used to manipulate a pointer, or point to the display on a Windows computer system is a member of this class.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_PointingDevice",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "DeviceInterface: " & objItem.DeviceInterface
    Wscript.Echo "DoubleSpeedThreshold: " & objItem.DoubleSpeedThreshold
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "Handedness: " & objItem.Handedness
    Wscript.Echo "HardwareType: " & objItem.HardwareType
    Wscript.Echo "InfFileName: " & objItem.InfFileName
    Wscript.Echo "InfSection: " & objItem.InfSection
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "IsLocked: " & objItem.IsLocked
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "NumberOfButtons: " & objItem.NumberOfButtons
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PointingType: " & objItem.PointingType
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "QuadSpeedThreshold: " & objItem.QuadSpeedThreshold
    Wscript.Echo "Resolution: " & objItem.Resolution
    Wscript.Echo "SampleRate: " & objItem.SampleRate
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "Synch: " & objItem.Synch
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
Next

Win32_PortableBattery
The Win32_PortableBattery WMI class contains the properties related to a portable battery, such as one used for a notebook computer.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_PortableBattery",,48)
For Each objItem in colItems
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "BatteryRechargeTime: " & objItem.BatteryRechargeTime
    Wscript.Echo "BatteryStatus: " & objItem.BatteryStatus
    Wscript.Echo "CapacityMultiplier: " & objItem.CapacityMultiplier
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "Chemistry: " & objItem.Chemistry
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DesignCapacity: " & objItem.DesignCapacity
    Wscript.Echo "DesignVoltage: " & objItem.DesignVoltage
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "EstimatedChargeRemaining: " & objItem.EstimatedChargeRemaining
    Wscript.Echo "EstimatedRunTime: " & objItem.EstimatedRunTime
    Wscript.Echo "ExpectedBatteryLife: " & objItem.ExpectedBatteryLife
    Wscript.Echo "ExpectedLife: " & objItem.ExpectedLife
    Wscript.Echo "FullChargeCapacity: " & objItem.FullChargeCapacity
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Location: " & objItem.Location
    Wscript.Echo "ManufactureDate: " & objItem.ManufactureDate
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "MaxBatteryError: " & objItem.MaxBatteryError
    Wscript.Echo "MaxRechargeTime: " & objItem.MaxRechargeTime
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "SmartBatteryVersion: " & objItem.SmartBatteryVersion
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "TimeOnBattery: " & objItem.TimeOnBattery
    Wscript.Echo "TimeToFullCharge: " & objItem.TimeToFullCharge
Next

Win32_PortConnector
The Win32_PortConnector WMI class represents physical connection ports, such as DB-25 pin male, Centronics, or PS/2.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_PortConnector",,48)
For Each objItem in colItems
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConnectorPinout: " & objItem.ConnectorPinout
    Wscript.Echo "ConnectorType: " & objItem.ConnectorType
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "ExternalReferenceDesignator: " & objItem.ExternalReferenceDesignator
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "InternalReferenceDesignator: " & objItem.InternalReferenceDesignator
    Wscript.Echo "Manufacturer: " & objItem.Manufacturer
    Wscript.Echo "Model: " & objItem.Model
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "OtherIdentifyingInfo: " & objItem.OtherIdentifyingInfo
    Wscript.Echo "PartNumber: " & objItem.PartNumber
    Wscript.Echo "PortType: " & objItem.PortType
    Wscript.Echo "PoweredOn: " & objItem.PoweredOn
    Wscript.Echo "SerialNumber: " & objItem.SerialNumber
    Wscript.Echo "SKU: " & objItem.SKU
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "Tag: " & objItem.Tag
    Wscript.Echo "Version: " & objItem.Version
Next

Win32_PortResource
The Win32_PortResource WMI class represents an I/O port on a Windows computer system.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_PortResource",,48)
For Each objItem in colItems
    Wscript.Echo "Alias: " & objItem.Alias
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "CSCreationClassName: " & objItem.CSCreationClassName
    Wscript.Echo "CSName: " & objItem.CSName
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "EndingAddress: " & objItem.EndingAddress
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "StartingAddress: " & objItem.StartingAddress
    Wscript.Echo "Status: " & objItem.Status
Next

Win32_POTSModem
The Win32_PortResource WMI class represents an I/O port on a Windows computer system.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_POTSModem",,48)
For Each objItem in colItems
    Wscript.Echo "AnswerMode: " & objItem.AnswerMode
    Wscript.Echo "AttachedTo: " & objItem.AttachedTo
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "BlindOff: " & objItem.BlindOff
    Wscript.Echo "BlindOn: " & objItem.BlindOn
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "CompatibilityFlags: " & objItem.CompatibilityFlags
    Wscript.Echo "CompressionInfo: " & objItem.CompressionInfo
    Wscript.Echo "CompressionOff: " & objItem.CompressionOff
    Wscript.Echo "CompressionOn: " & objItem.CompressionOn
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "ConfigurationDialog: " & objItem.ConfigurationDialog
    Wscript.Echo "CountriesSupported: " & objItem.CountriesSupported
    Wscript.Echo "CountrySelected: " & objItem.CountrySelected
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "CurrentPasswords: " & objItem.CurrentPasswords
    Wscript.Echo "DCB: " & objItem.DCB
    Wscript.Echo "Default: " & objItem.Default
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "DeviceLoader: " & objItem.DeviceLoader
    Wscript.Echo "DeviceType: " & objItem.DeviceType
    Wscript.Echo "DialType: " & objItem.DialType
    Wscript.Echo "DriverDate: " & objItem.DriverDate
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorControlForced: " & objItem.ErrorControlForced
    Wscript.Echo "ErrorControlInfo: " & objItem.ErrorControlInfo
    Wscript.Echo "ErrorControlOff: " & objItem.ErrorControlOff
    Wscript.Echo "ErrorControlOn: " & objItem.ErrorControlOn
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "FlowControlHard: " & objItem.FlowControlHard
    Wscript.Echo "FlowControlOff: " & objItem.FlowControlOff
    Wscript.Echo "FlowControlSoft: " & objItem.FlowControlSoft
    Wscript.Echo "InactivityScale: " & objItem.InactivityScale
    Wscript.Echo "InactivityTimeout: " & objItem.InactivityTimeout
    Wscript.Echo "Index: " & objItem.Index
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "MaxBaudRateToPhone: " & objItem.MaxBaudRateToPhone
    Wscript.Echo "MaxBaudRateToSerialPort: " & objItem.MaxBaudRateToSerialPort
    Wscript.Echo "MaxNumberOfPasswords: " & objItem.MaxNumberOfPasswords
    Wscript.Echo "Model: " & objItem.Model
    Wscript.Echo "ModemInfPath: " & objItem.ModemInfPath
    Wscript.Echo "ModemInfSection: " & objItem.ModemInfSection
    Wscript.Echo "ModulationBell: " & objItem.ModulationBell
    Wscript.Echo "ModulationCCITT: " & objItem.ModulationCCITT
    Wscript.Echo "ModulationScheme: " & objItem.ModulationScheme
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PortSubClass: " & objItem.PortSubClass
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "Prefix: " & objItem.Prefix
    Wscript.Echo "Properties: " & objItem.Properties
    Wscript.Echo "ProviderName: " & objItem.ProviderName
    Wscript.Echo "Pulse: " & objItem.Pulse
    Wscript.Echo "Reset: " & objItem.Reset
    Wscript.Echo "ResponsesKeyName: " & objItem.ResponsesKeyName
    Wscript.Echo "RingsBeforeAnswer: " & objItem.RingsBeforeAnswer
    Wscript.Echo "SpeakerModeDial: " & objItem.SpeakerModeDial
    Wscript.Echo "SpeakerModeOff: " & objItem.SpeakerModeOff
    Wscript.Echo "SpeakerModeOn: " & objItem.SpeakerModeOn
    Wscript.Echo "SpeakerModeSetup: " & objItem.SpeakerModeSetup
    Wscript.Echo "SpeakerVolumeHigh: " & objItem.SpeakerVolumeHigh
    Wscript.Echo "SpeakerVolumeInfo: " & objItem.SpeakerVolumeInfo
    Wscript.Echo "SpeakerVolumeLow: " & objItem.SpeakerVolumeLow
    Wscript.Echo "SpeakerVolumeMed: " & objItem.SpeakerVolumeMed
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "StringFormat: " & objItem.StringFormat
    Wscript.Echo "SupportsCallback: " & objItem.SupportsCallback
    Wscript.Echo "SupportsSynchronousConnect: " & objItem.SupportsSynchronousConnect
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "Terminator: " & objItem.Terminator
    Wscript.Echo "TimeOfLastReset: " & objItem.TimeOfLastReset
    Wscript.Echo "Tone: " & objItem.Tone
    Wscript.Echo "VoiceSwitchFeature: " & objItem.VoiceSwitchFeature
Next

Win32_PowerManagementEvent
The Win32_PowerManagementEvent WMI class represents power management events resulting from power state changes. These state changes are associated with either the Advanced Power Management (APM) or the Advanced Configuration and Power Interface (ACPI) system management protocols.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_PowerManagementEvent",,48)
For Each objItem in colItems
    Wscript.Echo "EventType: " & objItem.EventType
    Wscript.Echo "OEMEventCode: " & objItem.OEMEventCode
Next

Win32_Printer
The Win32_Printer WMI class represents a device connected to a Windows computer system that can reproduce a visual image on paper or other medium.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_Printer",,48)
For Each objItem in colItems
    Wscript.Echo "Attributes: " & objItem.Attributes
    Wscript.Echo "Availability: " & objItem.Availability
    Wscript.Echo "AveragePagesPerMinute: " & objItem.AveragePagesPerMinute
    Wscript.Echo "Capabilities: " & objItem.Capabilities
    Wscript.Echo "CapabilityDescriptions: " & objItem.CapabilityDescriptions
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "ConfigManagerErrorCode: " & objItem.ConfigManagerErrorCode
    Wscript.Echo "ConfigManagerUserConfig: " & objItem.ConfigManagerUserConfig
    Wscript.Echo "CreationClassName: " & objItem.CreationClassName
    Wscript.Echo "DefaultPriority: " & objItem.DefaultPriority
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DetectedErrorState: " & objItem.DetectedErrorState
    Wscript.Echo "DeviceID: " & objItem.DeviceID
    Wscript.Echo "DriverName: " & objItem.DriverName
    Wscript.Echo "ErrorCleared: " & objItem.ErrorCleared
    Wscript.Echo "ErrorDescription: " & objItem.ErrorDescription
    Wscript.Echo "HorizontalResolution: " & objItem.HorizontalResolution
    Wscript.Echo "InstallDate: " & objItem.InstallDate
    Wscript.Echo "JobCountSinceLastReset: " & objItem.JobCountSinceLastReset
    Wscript.Echo "LanguagesSupported: " & objItem.LanguagesSupported
    Wscript.Echo "LastErrorCode: " & objItem.LastErrorCode
    Wscript.Echo "Location: " & objItem.Location
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "PaperSizesSupported: " & objItem.PaperSizesSupported
    Wscript.Echo "PNPDeviceID: " & objItem.PNPDeviceID
    Wscript.Echo "PortName: " & objItem.PortName
    Wscript.Echo "PowerManagementCapabilities: " & objItem.PowerManagementCapabilities
    Wscript.Echo "PowerManagementSupported: " & objItem.PowerManagementSupported
    Wscript.Echo "PrinterPaperNames: " & objItem.PrinterPaperNames
    Wscript.Echo "PrinterState: " & objItem.PrinterState
    Wscript.Echo "PrinterStatus: " & objItem.PrinterStatus
    Wscript.Echo "PrintJobDataType: " & objItem.PrintJobDataType
    Wscript.Echo "PrintProcessor: " & objItem.PrintProcessor
    Wscript.Echo "SeparatorFile: " & objItem.SeparatorFile
    Wscript.Echo "ServerName: " & objItem.ServerName
    Wscript.Echo "ShareName: " & objItem.ShareName
    Wscript.Echo "SpoolEnabled: " & objItem.SpoolEnabled
    Wscript.Echo "StartTime: " & objItem.StartTime
    Wscript.Echo "Status: " & objItem.Status
    Wscript.Echo "StatusInfo: " & objItem.StatusInfo
    Wscript.Echo "SystemCreationClassName: " & objItem.SystemCreationClassName
    Wscript.Echo "SystemName: " & objItem.SystemName
    Wscript.Echo "TimeOfLastReset: " & objItem.TimeOfLastReset
    Wscript.Echo "UntilTime: " & objItem.UntilTime
    Wscript.Echo "VerticalResolution: " & objItem.VerticalResolution
Next

Win32_PrinterConfiguration
The Win32_PrinterConfiguration WMI class defines the configuration for a printer device. This includes capabilities such as resolution, color, fonts, and orientation.

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_PrinterConfiguration",,48)
For Each objItem in colItems
    Wscript.Echo "BitsPerPel: " & objItem.BitsPerPel
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "Collate: " & objItem.Collate
    Wscript.Echo "Color: " & objItem.Color
    Wscript.Echo "Copies: " & objItem.Copies
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "DeviceName: " & objItem.DeviceName
    Wscript.Echo "DisplayFlags: " & objItem.DisplayFlags
    Wscript.Echo "DisplayFrequency: " & objItem.DisplayFrequency
    Wscript.Echo "DitherType: " & objItem.DitherType
    Wscript.Echo "DriverVersion: " & objItem.DriverVersion
    Wscript.Echo "Duplex: " & objItem.Duplex
    Wscript.Echo "FormName: " & objItem.FormName
    Wscript.Echo "HorizontalResolution: " & objItem.HorizontalResolution
    Wscript.Echo "ICMIntent: " & objItem.ICMIntent
    Wscript.Echo "ICMMethod: " & objItem.ICMMethod
    Wscript.Echo "LogPixels: " & objItem.LogPixels
    Wscript.Echo "MediaType: " & objItem.MediaType
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "Orientation: " & objItem.Orientation
    Wscript.Echo "PaperLength: " & objItem.PaperLength
    Wscript.Echo "PaperSize: " & objItem.PaperSize
    Wscript.Echo "PaperWidth: " & objItem.PaperWidth
    Wscript.Echo "PelsHeight: " & objItem.PelsHeight
    Wscript.Echo "PelsWidth: " & objItem.PelsWidth
    Wscript.Echo "PrintQuality: " & objItem.PrintQuality
    Wscript.Echo "Scale: " & objItem.Scale
    Wscript.Echo "SettingID: " & objItem.SettingID
    Wscript.Echo "SpecificationVersion: " & objItem.SpecificationVersion
    Wscript.Echo "TTOption: " & objItem.TTOption
    Wscript.Echo "VerticalResolution: " & objItem.VerticalResolution
    Wscript.Echo "XResolution: " & objItem.XResolution
    Wscript.Echo "YResolution: " & objItem.YResolution
Next

Win32_PrintJob
The Win32_PrintJob WMI class represents a print job generated by a Windows application. Any unit of

Essentials

Overview

Features

Screenshots

Pricing

Order now!

Download

Full eval

In-depth

Awards/reviews

Manual

Brochure/datasheet

Product news

Testimonials/Case Studies

Product Tour/Webcast

Using scripting

What's new in v. 7?

Support

Support Center

Forums

FAQ/KBase